Continue changing the delay time & re-recording the clip until the two clips line up perfectly.Most DAWs have a ‘delay’ value that can be set on the second track.You will see the clip recorded on the second track, delayed by the round-trip latency. Use your transport bar to play & record simultaneously.Connect the digital ports back-to-back using a suitable digital cable.Create another track with inputs set to the interface DI (i.e inputs 9 & 10).Select a clip with a sharp attack, like a snare hit.Create a track with outputs set to the interface DO (i.e.Open your DAW and select your audio interface driver.It is very easy to measure the round-trip latency of your audio interface using a DAW and a digital cable. If the designated synchronization source is not connected, Lyra will use its internal clock at the selected sample rate. When in stand-alone mode, if Lyra is set to use an external synchronization source, (eg, a digital input, Wordclock or ADAT), then the sample rate will follow the sample rate of the external source.
Thus stand-alone mode can be used to configure a stand-alone D/A converter and A/D converter, with static mixing if required. This allows you to connect the digital input pair to one or more analogue output pairs, and to connect the analogue input pairs to the digital output pair. When the unit is re-powered and detects that no USB connection is active, it reloads the settings which were last used.Īll of the outputs on the Lyra have mixers which determine how the output is derived from the various input signals.Disconnect Lyra from the host computer USB connection and the power source.Place Lyra in standby by pressing the standby button (far right on the front panel).Configure the Lyra using the control panel application so that it works how you want it to.Connect the Lyra to the host computer using the USB connection.The steps to achieve this are as follows: This is done by setting up the unit as required using the Lyra Control Panel app from a host computer, then re-starting it without the computer. It is possible to operate Lyra without a connection to a host computer, for example, in a hi-fi set-up.
0 kommentar(er)
